E702289_SH7290 Datasheet, PDF (94/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Set hardware break conditions as follows:
Break condition 1: When address H'0c0000c6 is accessed in a read cycle, a break condition is
satisfied.
Break condition 2: When address H'0c0000b2 is accessed in a read cycle, a break condition is
satisfied.
Follow the setting method described in the previous section.
• When Break Condition 1,2 setting has been completed, the state of the [Breakpoints] window
is as follows.
Figure 3.51 [Breakpoints] Window (After Sequential Break Condition Setting)
• Close the [Breakpoints] window.
• Set the program counter and stack pointer values (PC = H’0c00006c and R15 = H’0c000c00)
that have been set in section 3.9, Setting Registers, in the [Registers] window. Click the [Go]
button.
70