E702289_SH7290 Datasheet, PDF (203/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

5.2.22 VPMAP_CLEAR: VC
Description:
Clears the address translation (VP_MAP) table that is set in the emulator.
Format:
vc [<address>]
Table 5.23 VPMAP_CLEAR Command Parameter
Parameter
Type
Description
<address>
Numerical value Sets the virtual start address of the VP_MAP table
range to be cleared.
Note: All contents in the VP_MAP table are cleared if <address> is omitted.
Examples:
To clear all the contents in the VP_MAP table:
>vc (RET)
To clear the contents in the VP_MAP table range starting from virtual address H'4000:
>vc H'4000 (RET)
Related Items:
VD, VE, and VS commands
Note: This command is not supported in a device in which the MMU is not built-in.
179