E702289_SH7290 Datasheet, PDF (57/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

3.7 Downloading the Tutorial Program
3.7.1 Downloading the Tutorial Program
Download the object program to be debugged.
• Select [Load Program...] from the [File] menu. The [Load Program] dialog box is displayed.
Enter ‘[installation directory]\tutorial\tutorial\Debug\tutorial.abs’ in the [File name] list box as
shown in figure 3.6, then click the [Open] button.
Figure 3.6 [Load Program] Dialog Box
Notes: 1. When installing the emulator, if no directory is specified and the HEW is in use, the
program is installed under ‘\Hew\hdi5\e10a’. When the HEW is not in use, the
program is installed under ‘\root directory\E10A’.
2. The SNI file is required so that the profiler function can be used.
3. The [Verify] check box is disabled in this product.
After the file has been loaded, the following dialog box displays information about the
memory areas to which the program code has been transferred.
Figure 3.7 [HDI] Dialog Box
• Click the [OK] button to continue.
33