E702289_SH7290 Datasheet, PDF (204/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

5.2.23 VPMAP_DISPLAY: VD
Description:
Displays the address translation (VP_MAP) table set in the emulator.
Format:
vd
Table 5.24 VPMAP_DISPLAY Command Parameter
Parameter
None
Type
Description
Example:
To display the VP_MAP table:
>vd (RET)
<VADDR_TOP>
01000000
01010000
ENABLE
<VADDR_END>
0100ffff
0101ffff
<PADDR_TOP>
02000000
03000000
<VADDR_TOP>, <VADDR_END>, and <PADDR_TOP> represent the virtual start address, the
virtual end address, and the physical start address, respectively. ENABLE or DISABLE in the last
line indicates that the VP_MAP table is valid or invalid.
Related Items:
VC, VE, and VS commands
Note: This command is not supported in a device in which the MMU is not built-in.
180