E702289_SH7290 Datasheet, PDF (169/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

5.2.1 AUD_CLOCK:AUCL
Description:
Sets or displays the AUD clock (AUDCK) values that have been set.
Format:
aucl [<option>]
<option> = <aud_clock>
Table 5.2 AUD_CLOCK Command Parameter
Parameter
Type
Description
<aud_clock>
Numerical value Sets values from 1 to 7.
1: 5 MHz (PCI), 7.5 MHz (PCMCIA)
2: 10 MHz (PCI), 15 MHz (PCMCIA)
3: 20 MHz (PCI), 30 MHz (PCMCIA)
4: 30 MHz (PCI), 60 MHz (PCMCIA)
5: 40 MHz (PCI)
6: 50 MHz (PCI)
7: 60 MHz (PCI)
Notes: 1. When <option> is omitted, the AUD clock (AUDCK) values that have been set are
displayed.
2. The range of frequencies that the AUD operates under differs according to the
devices used. For details, refer to section 6.5.4, Notes on Using the JTAG Clock
(TCK) and AUD Clock (AUDCK).
3. The AUD clock (AUDCK) value, which can be set with this command, may differ
according to emulator products. For details, refer to section 6.5.4, Notes on Using the
JTAG Clock (TCK) and AUD Clock (AUDCK).
Note: The parameters for this command differ according to the product. For the
specifications of each product, refer to the online help.
145