E702289_SH7290 Datasheet, PDF (212/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Figure 6.3 shows the pin arrangement of the Hitachi-UDI port connector (36 pins).
Hitachi-UDI port connector
2.8
+0.2
0
2
Edge of the board
(connected to the connector)
0.7^{+00.1 36}
(Pin 1 mark)
1
4.09
35
1.27
21.59
37.61
43.51
: Pattern inhibited area
Unit: mm
Top view
Pin
No. Signal
Input/ SH7290 Pin No.
Output ^*1 CSP240
1 AUDCK
Output
R18
2 GND
3 AUDATA0 Output ^J17
4 GND
5 AUDATA1 Output
K19
6 GND
7 ^{AUDATA2 Output}
K17
8 GND
9 AUDATA3 Output K18
10 GND
11^*2 /AUDSYNC Output
T14
12 _GND
13 NC
14 GND
15 NC
16 _GND
17 TCK
Input
H18
18 GND
Note
Pin
No. Signal
Input/ SH7290 Pin No.
Output ^*1 _CSP240
19 TMS
Input
J19
20 GND
21^*2 /TRST
Input
J18
22 GND
23 TDI
Input
H17
24 GND
25 ^TDO
Output T18
26 GND
27^{*2 /ASEBRKAK} Output
U18
28 GND
29 /CA
Output
M18
30 _GND
31^*2 /RESETP Output
N16
32 GND
33^*3 GND
34 _GND
Output
35 NC
36 GND
Notes:1. Input to or output from the user system
2. The slash (/) means that the signal is low-active.
3. The emulator monitors the GND signal of the user system and
detects whether or not the user system is connected.
Note
User reset
Figure 6.3 Pin Arrangement of the Hitachi-UDI Port Connector (36 Pins)
188