E702289_SH7290 Datasheet, PDF (39/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

2.5 System Check
When the HDI program is executed, use the procedure below to check that the emulator is
operating correctly.
1. Check that the emulator card is inserted in the host computer’s slot.
2. Connect the user system interface cable to the connector of the card emulator.
3. Connect the user system interface cable to the Hitachi-UDI port connector.
4. Supply power to the host computer and select [HDI for E10A SHxxxx] -> [Hitachi Debugging
Interface] from the [Start] menu.
Figure 2.6 [Start] Menu
15