E702289_SH7290 Datasheet, PDF (106/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

3.20 Stack Trace Function
The emulator uses the stack’s information to display the name of the calling function for a
function at which the program counter is currently pointing.
Notes: 1. This function can be used only when the load module that has the Dwarf2-type
debugging information is loaded.
2. For details on the stack trace function, refer to the online help.
• Double-click the [BP] column in the sort function and set a software breakpoint.
Figure 3.59 [Source] Window (Software Breakpoint Setting)
• Set the same program counter and stack pointer values (PC = H’0c00006c and R15 =
H’0c000c00) as were set in section 3.9, Setting Registers (again, use the [Registers] window).
Click the [Go] button.
• After the break in execution, select [Stack Trace] from the [View] menu to open the [Stack
Trace] window.
82