E702289_SH7290 Datasheet, PDF (142/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Description:
The [Break Point] dialog box consists only of the [Address] page. This dialog box sets address
conditions and address areas. The [Address] page options are as follows:
Table 4.11 [Address] Page Options
Option
Description
[Value] edit box
Sets a breakpoint address with a number or a symbol.
[Normal] radio button
Does not set an address area.*
[Physical Space] radio button Shows that the break condition is the physical area.*
[Virtual Space] radio button Shows that the break condition is the virtual area.*
[ASID] edit box
Sets an ASID value (0 to 255) when the breakpoint address is in
the virtual area. Nothing is set as default.*
Note: These options are not supported in a device in which the MMU is not built-in.
Clicking the [OK] button enables breakpoints to be set. If the [Cancel] button is clicked, this
dialog box is closed without setting breakpoints.
Related Commands:
BREAKPOINT command
BREAKPOINT_CLEAR command
BREAKPOINT_DISPLAY command
BREAKPOINT_SET command
118