E702289_SH7290 Datasheet, PDF (101/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

3.19.2 AUD Trace Function
This function is operational when the AUD pin of the MCU is connected to the emulator.
The following is the procedure for setting the AUD trace function (this function does not need to
be set in an emulator that does not support the internal trace function):
1. Select [Trace] from the [View] menu.
2. Click the [Trace] window with the right mouse button and select [Acquisition] from the
pop-up menu to display the [Trace Acquisition] window.
3. Select the [AUD trace] radio button in the [Trace type] group box.
Figure 3.56 [Trace mode] Window
Note: For a description of each option, refer to table 3.4.
Note: The items that can be set in this window differ according to the product. For the
settings for each product, refer to the online help.
The trace results are displayed in the [Trace] window after the program execution is completed.
The display specifications in the [Trace] window are the same as the internal trace function.
77