E702289_SH7290 Datasheet, PDF (140/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Description:
Table 4.10 [Condition] Page Options
Option
[Break Condition] list
box
[Edit...] button
[Reset] button
[Reset All] button
Description
Displays the Break Condition settings.
The display at system initiation is as follows: When conditions are set,
Enable is displayed. When no conditions are set, Empty is displayed.
1 Empty (setting of Break Condition 1)
2 Empty (setting of Break Condition 2)
:
Changes the Break Condition settings selected in the [Break Condition]
list box. Clicking this button displays the [Break Condition] dialog boxes.
Clears the Break Condition settings selected in the [Break Condition] list
box.
Clears all Break Condition settings in the [Break Condition] list box.
Related Commands:
BREAKCONDITION_CLEAR command
BREAKCONDITION_DISPLAY command
BREAKCONDITION_ENABLE command
BREAKCONDITION_SET command
116