E702289_SH7290 Datasheet, PDF (167/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

5.2 Command Descriptions
The command list of the E10A emulator is shown below.
Table 5.1 E10A HDI Commands
No. Command
1 AUD_CLOCK
2 AUD_MODE
3 AUD_TRACE
4 BREAKCONDITION_
CLEAR
5 BREAKCONDITION_
DISPLAY
6 BREAKCONDITION_
ENABLE
7 BREAKCONDITION_
SET
8 BREAKPOINT
9 BREAKPOINT_CLEAR
10 BREAKPOINT_DISPLAY
11 BREAKPOINT_ENABLE
12 DEVICE_TYPE
13 GO_OPTION
14 JTAG_CLOCK
15 MEMORYAREA_SET
Abb. Function
AUCL Sets the AUD clock (AUDCK).
AUM Sets AUD trace conditions.
AUT Displays trace information.
BCC Clears hardware breakpoints that have been set.
BCD Displays hardware breakpoints that have been set.
BCE
BCS
Enables or disables hardware breakpoints that have
been set.
Sets hardware breakpoints.
BP
BC
BD
BE
DE
GP
JCK
MAS
Sets software breakpoints.
Clears software breakpoints that have been set.
Displays software breakpoints that have been set.
Enables or disables software breakpoints that have
been set.
Displays device type currently selected.
Displays or sets the emulation mode during user
program execution.
Displays or sets a JTAG clock (TCK) frequency.
Displays or sets memory area at command input, such
as load, verify, save, memory display, or memory
change.
143