E702289_SH7290 Datasheet, PDF (236/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

6.5.10 Performance Measurement Function
The SH7290 E10A emulator supports the performance measurement function.
1. Setting the performance measurement conditions
To set the performance measurement conditions, use the [Performance 1] dialog box and the
PERFORMANCE_SET command. When the right mouse button on the [Performance
Analysis] window is clicked, the popup menu is displayed and the [Performance 1] dialog box
is displayed by selecting [Setting].
Note: For the command line syntax, refer to the online help.
 Specifying the measurement start/end conditions
The measurement start/end conditions are specified in [Mode] in the [Performance 1]
dialog box. Three conditions can be set as shown in table 6.11.
Table 6.11 Conditions Specified in [Mode]
Item
Normal break
Break Condition 1 -> 2
Break Condition 2 -> 1
Description
Measurement is started by executing a program and ended when a
break condition is satisfied.
Measurement is started from the satisfaction of the condition set in
Break Condition 1 to the satisfaction of the condition set in Break
Condition 2.
Measurement is started from the satisfaction of the condition set in
Break Condition 2 to the satisfaction of the condition set in Break
Condition 1.
212