E702289_SH7290 Datasheet, PDF (231/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

AUD Trace Display: Figure 6.12 shows an example of the AUD trace display.
Figure 6.12 [Trace] Window
Double-clicking the source line jumps the cursor to the corresponding section on the [Source]
window.
The TYPE, ADDR, and DATA columns have different meanings according to the selected AUD
trace types.
Table 6.10 [Trace] Window Display Contents
Trace Type
Branch trace
TYPE Column
BRANCH
DESTINATION
Window trace
Software trace
MEMORY
S_TRACE
ADDR Column
Branch source address
Branch destination
address
Memory access address
Address at which the trace
(x) function is executed
DATA Column
No display
No display
Memory access data
Register value
Notes: 1. When the trace display is performed during user program execution, the mnemonics,
operands, or source is not displayed.
2. The AUD trace function outputs the differences between newly output branch source
addresses and previously output branch source addresses. The window trace function
outputs the differences between newly output addresses and previously output
addresses. If the previous branch source address is the same as the upper 16 bits, the
lower 16 bits are output. If it matches the upper 24 bits, the lower 8 bits are output. If
207