E702289_SH7290 Datasheet, PDF (148/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Description:
Table 4.14 [Address] Page Options
Option
Description
[Don’t Care] check box
Does not set address conditions.
[Address] radio button
Sets use of the normal address bus as break conditions.
[Only program fetched
address] radio button
Sets a break before prefetched address execution as break
conditions.
[Only program fetched
Sets a break after prefetched address execution as break conditions.
address after] radio button
[X-bus address] radio
button
Sets the X-bus address as a break condition. Can be set only with
Break Condition 1.
[Y-bus address] radio
button
Sets the Y-bus address as a break condition. Can be set only with
Break Condition 1.
[Address] edit box
Sets the address bus value with a number or a symbol.
[Non user mask] radio
button
Sets no mask conditions.
[User mask] radio button Sets mask conditions.
[Mask] edit box
Sets the mask bits if [User mask] is selected. For masked bits, the
break condition is satisfied regardless of the address values.
Note: This page is displayed when the conditions of Break Condition 1 and Break Condition 2 are
set.
A page name to be displayed and the contents of an option that can be set will change depending
on the radio button selected.
Table 4.15 Address Options
Option
Description
[Address] radio button,
[X-Bus address] radio button, and
[Y-Bus address] radio button
All pages can be selected and masks can be set.
[Only program fetched address] radio
button
The [Address] and [ASID] pages can be set; however,
no mask can be set.
[Only program fetched address after] radio The [Address] and [ASID] pages can be set.
button
Note: This function differs according to the product. For the specifications of each
product, refer to section 6.5.2, Break Condition Functions, or to the online help.
124