E702289_SH7290 Datasheet, PDF (158/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Description:
This window displays the trace buffer contents. The items listed in table 4.21 are displayed.
Table 4.21 [Trace] Window Display Items
Item
[No.]
[IP]
[TYPE]
[ADDR/DATA]
[MNEMONIC]
[OPERAND]
[Source]
Description
Displays the number in ascending order as the trace stop point is 0 (signed
decimal).
Displays the instruction pointer (signed decimal).
For the branch instruction trace, displays the information type, that is, branch
source or branch destination.
BRANCH: Branch source
DESTINATION: Branch destination
For the branch instruction trace, displays the branch source or branch destination
address.
Displays the execution instruction mnemonic.
Displays the execution instruction operand.
Displays the C-source line of the address that the trace has been acquired.
The pop-up menu, opened by clicking the right mouse button, can be used to set, change, and
clear trace conditions. For details, refer to the Hitachi Debugging Interface User’s Manual.
Notes:
1. In some cases, the emulator address may be acquired by trace. In such a case, the
following message will be displayed. Ignore this address because it is not a user program
address.
*** EML ***
2. The [Halt] menu in the pop-up menu is active only when the [Trace] window is open
during user program execution. When the internal trace is used, realtime emulation cannot
be performed by using the [Halt] menu.
Related Command:
TRACE_DISPLAY command
134