E702289_SH7290 Datasheet, PDF (42/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

7. The HDI window is displayed, and the dialog box is displayed as shown in figure 2.9.
Figure 2.9 Dialog Box of the RESET Signal Input Request Message
8. Power on the user system.
9. Input the reset signal from the user system, and click the [OK] button.
10. When "Link Up" is displayed on the status bar, the HDI initiation is completed.
Figure 2.10 [HDI] Status Bar
Notes: 1. When the HDI is not linked up even if the above procedure has been executed, the
driver will not be set correctly. Install drivers provided under the /DRIVERS
directory in the CD-R according to the screen instructions. For instructions on
how to check the driver has been correctly set, refer to the OS manual for your
host computer or the following URL:
http://www.hitachi.co.jp/Sicd/English/Products/micom/dev_env/tool/eml/e10a/
she10aqa.htm
2. If the user system interface cable is disconnected to the Hitachi-UDI port
connector on the user system during user program execution, the following dialog
box will be displayed.
Figure 2.11 [JTAG Connector Disconnected] Dialog Box
18