E702289_SH7290 Datasheet, PDF (239/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

 Measurement item
Items are measured with [Channel 1 to 4] in the [Performance 1] dialog box. Maximum
four conditions can be specified at the same time. Table 6.12 shows the measurement
items (Options in table 6.12 are parameters for <mode> of the PERFORMANCE_SET
command. They are displayed for CONDITION in the [Performance Analysis] window).
Table 6.12 Measurement Item
Selected Name
Disabled
Elapsed time
Number of execution states
Branch instruction counts
Number of execution instructions
DSP-instruction execution counts
Instruction/data conflict cycle
Other conflict cycles than instruction/data
Exception/interrupt counts
Data-TLB miss cycle
Instruction-TLB miss cycle
Interrupt counts
Number of BL=1 instructions
Number of MD=1 instructions
Instruction cache-miss counts
Data cache-miss counts
Instruction fetch stall
Data access stall
Instruction cache-miss stall
Data cache-miss stall
Non-cacheable access stall
Option
None
AC
VS
BT
I
DI
MAC
OC
EA
MTS
ITS
INT
BL1
MD1
IC
DC
IF
DA
ICS
DCS
NCS
215