E702289_SH7290 Datasheet, PDF (161/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Description:
Table 4.23 [Trace mode] Page Options
Option
Description
[AUD trace] radio button
Uses AUD trace functions. By default, this box is not checked.
[Internal trace] radio button
Uses the internal trace functions. By default, this box is checked.
[Realtime trace] radio button
When the next branch occurs while the trace information is being
output, the information is stopped and the next trace information
is output. The user program can be executed in realtime, but
some trace information will not be output. By default, this box is
checked.
[Non realtime trace] radio button When the next branch occurs while the trace information is being
output, the CPU stops operations until the information is output.
The user program is not executed in realtime. By default, this
box is not checked.
[Trace continue] radio button
When the trace buffer becomes full, this function always
overwrites the oldest trace information to acquire the latest trace
information.
[Trace stop] radio button
When the trace buffer becomes full, the trace information is not
acquired.
[AUD trace display range] group Inputs the start or end pointer value in the trace display range as
box
numerical values. By default, the start pointer is –D’8191 and the
end pointer is –D’0000. In the PCMCIA card emulator, –D’8191
to D’0 can be set to the trace pointer. In the PCI card emulator,
–D’32767 to D’0 can be set.
Related Command:
AUD_MODE command
137