E702289_SH7290 Datasheet, PDF (133/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Description:
The [Breakpoints] window displays breakpoint setting information. The items listed in the
following tables are displayed.
Table 4.6 [Breakpoints] Window Display Items
Item
Description
[Enable]
Displays whether the break condition is enabled or disabled.
BREAKPOINT: l
Break Condition: m (If the address is the same as the one that has been set to the
BREAKPOINT, the mark is l.)
[File/Line] Displays the file name and line number where the breakpoint is set.
[Symbol]
Displays the symbol corresponding to the breakpoint address. If no symbol has
been defined for the address, nothing is displayed.
[Address] Displays the address where the breakpoint is set.
[Type]
Displays the break condition type as follows:
Break Point: Software breakpoint (Virtual or physical address is determined
according to the MMU state at setting.)
Break Point Virtual Space ASID = D'xxx: Software breakpoint (Virtual address.
ASID value is displayed in decimal.)
Break Point Physical Space: Software breakpoint (Physical address.)
Break Condition 1 to Break Condition 3: Hardware break condition
Note: Only "Break Point" is displayed in the [Type] item when the device does not support the
MMU.
109