E702289_SH7290 Datasheet, PDF (92/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

3.18.1 Setting the Sequential Break Condition
The emulator has sequential break functions. When the hardware break conditions listed in table
3.3 are satisfied, program execution is halted. This mode is called sequential break.
Table 3.3 Sequential Break Conditions
Break Condition
Sequential break condition 2-1
Description
Program is halted when Break Condition 2 and Break
Condition 1 are satisfied in that order.
Sequential break condition 2-1 is described below as an example.
Before executing the program, change setting in the [Configuration] dialog box. Otherwise, the
sequential break does not function.
• Select [Configure Platform...] from the [Setup] menu. The [Configuration] dialog box is
displayed.
• Select Sequential break condition 2-1 from the [Emulation mode] combo box.
68