E702289_SH7290 Datasheet, PDF (35/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

2.3 Connecting the Card Emulator to the Host Computer
Insert the card emulator, according to its type, in a PCMCIA TYPE II slot or PCI slot on the host
computer (figures 2.2 and 2.3).
Note: When using Windows^®98, Windows^®Me, or Windows^®2000, be sure to install the
HDI before putting the card emulator in place.
Figure 2.2 Inserting the PCMCIA Card Emulator in the Host Computer’s Slot
Figure 2.3 Inserting the PCI Card Emulator in the Host Computer’s Slot
Use the procedure, described in section 2.4, to connect the emulator to the user system with the
user system interface cable, or to disconnect them when moving the emulator or the user system.
11