E702289_SH7290 Datasheet, PDF (244/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

6. If [User] is set in the [UBC mode] list box in the [Configuration] dialog box, Break
Condition (UBC) and Trace Acquisition Condition (AUD) cannot be selected.
7. A noise filter is provided in the emulator to prevent malfunction due to noises of the
/CA pin. It takes about 70 ns from assertion (negation) of /CA to reflection to the
emulator.
6.5.12 Downloading to the Flash Memory
Examples of connecting with and downloading to the flash memory (DA28F640J5-150)
manufactured by Intel Corporation are described below. Note that a sample is provided in the
\Fmtool folder within the folder in which the SH7290 E10A is installed. File configuration of the
sample program is as follows:
Table 6.15 File Configuration of the Sample Program
Item
Sample program for downloading to the flash memory
(load module file, S-type format, with big endian)
Sample program for downloading to the flash memory
(source file)
File name
\Fmtool\Fmtool.mot
\Fmtool\Fmtool.asm
Specifications of the sample program are as follows:
Table 6.16 Specifications of the Sample Program
Item
RAM area to be used
Writing module start address
Erasing module start address
Contents
H’0C001000 to H’0C001FFF
H’0C001100
H’0C001000
220