E702289_SH7290 Datasheet, PDF (89/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

The newly set hardware breakpoint is displayed in the [Breakpoints] window. With this setting,
Break Condition 1 is displayed in [Type] in the [Breakpoints] window.
This completes the setting of the Break Condition 1 hardware break condition. When the program
is executed, a break will occur when address H'0c0000b2 is accessed in a read cycle.
Figure 3.47 [Breakpoints] Window ([Break Condition 1] Setting)
• Close the [Breakpoints] window.
• Set the program counter and stack pointer values (PC = H’0c00006c and R15 = H’0c000c00)
that have been set in section 3.9, Setting Registers, in the [Registers] window. Click the [Go]
button.
65