E702289_SH7290 Datasheet, PDF (43/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

3. If the emulator is not initiated, the following dialog boxes shown in figures 2.12
through 2.16 will be displayed.
(a) If the following dialog box is displayed, the power of the user system may not be
input or the RESET signal may not be input to the device. Check the input
circuits for the power of the user system and the reset pin.
Figure 2.12 [Can not find /RESET signal] Dialog Box
(b) If the following dialog box is displayed, check that the Hitachi-UDI port
connector on the user system is correctly connected.
Figure 2.13 [Check the connection] Dialog Box
(c) If the following dialog box is displayed, the device may not correctly operate.
Check if there are reasons for illegal device operation.
Figure 2.14 [COMMUNICATION TIMEOUT ERROR] Dialog Box
19