E702289_SH7290 Datasheet, PDF (168/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

Table 5.1 E10A HDI Commands (cont)
No. Command
16 REFRESH
17 RESTART
18 STATUS
19 STEP_INTERRUPT
20 TRACE_DISPLAY
21 UBC_MODE
22 VPMAP_CLEAR
23 VPMAP_DISPLAY
24 VPMAP_ENABLE
25 VPMAP_SET
Abb. Function
RF Updates the HDI memory information to the latest
contents.
RST Restarts the emulator.
STS Displays emulator state information.
SI Displays or sets the enable or disable status of interrupts
during step execution.
TD Displays acquired trace buffer information.
UM Displays or sets UBC use states.
VC Clears the emulator address translation (VP_MAP) table
which has been set.
VD Displays the emulator address translation (VP_MAP)
table.
VE Enables or disables the emulator address translation
(VP_MAP) table.
VS Sets emulator address translation (VP_MAP) table.
Note: Support for these commands varies with the product. For the specifications of each
product, refer to the online help.
144