E702289_SH7290 Datasheet, PDF (82/252 Pages) Renesas Technology Corp – SH7290 E10A Emulator

The software breakpoint that has been set is displayed in the [Breakpoints] window.
Figure 3.39 [Breakpoints] Window (Software Breakpoint Setting)
To stop the tutorial program at the breakpoint, the following procedure must be executed:
• Close the [Breakpoints] window.
• Set the program counter and stack pointer values (PC = H’0c00006c and R15 = H’0c000c00)
that have been set in section 3.9, Setting Registers, in the [Registers] window. Click the [Go]
button.
The program runs, and stops at the set breakpoint.
Figure 3.40 [Source] Window at Execution Stop (Software Break)
58