PIC18F1220_07 Datasheet, PDF (269/308 Pages) Microchip Technology – 18/20/28-Pin High-Performance, Enhanced Flash Microcontrollers with 10-bit A/D and nanoWatt Technology

PIC18F1220/1320
23.0 DC AND AC CHARACTERISTICS GRAPHS AND TABLES
Note:
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore, outside the warranted range.
“Typical” represents the mean of the distribution at 25°C. “Maximum” or “minimum” represents (mean + 3σ) or (mean – 3σ)
respectively, where σ is a standard deviation, over the whole temperature range.
FIGURE 23-1:
0.5
TYPICAL IDD vs. FOSC OVER VDD PRI_RUN, EC MODE, +25°C
Typical: statistical mean @ 25°C
Maximum: mean + 3σ (-40°C to +125°C)
0.4 ^{Minimum: mean – 3σ (-40°C to +125°C)}
5.5V
5.0V
0.3
4.5V
4.0V
0.2
3.5V
3.0V
0.1
2.5V
2.0V
0.0
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
FOSC (MHz)
FIGURE 23-2:
0.7
MAXIMUM IDD vs. FOSC OVER VDD PRI_RUN, EC MODE, -40°C TO +85°C
Typical: statistical mean @ 25°C
Maximum: mean + 3σ (-40°C to +125°C)
0.6 _{Minimum: mean – 3σ (-40°C to +125°C)}
5.5V
5.0V
0.5
4.5V
0.4
4.0V
0.3
3.5V
3.0V
0.2
2.5V
0.1
2.0V
0.0
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
FOSC (MHz)
© 2007 Microchip Technology Inc.
DS39605F-page 267