PIC18F1220_07 Datasheet, PDF (123/308 Pages) Microchip Technology – 18/20/28-Pin High-Performance, Enhanced Flash Microcontrollers with 10-bit A/D and nanoWatt Technology

PIC18F1220/1320
FIGURE 15-5:
PWM OUTPUT RELATIONSHIPS (ACTIVE-LOW STATE)
CCP1CON<7:6>
SIGNAL
0
Duty
Cycle
Period
00 (Single Output)
10 (Half-Bridge)
(Full-Bridge,
01 _Forward)
(Full-Bridge,
11
Reverse)
P1A Modulated
P1A Modulated
P1B Modulated
P1A Active
P1B Inactive
P1C Inactive
P1D Modulated
P1A Inactive
P1B Modulated
P1C Active
P1D Inactive
Delay⁽¹⁾
Delay⁽¹⁾
PR2+1
Relationships:
• Period = 4 * TOSC * (PR2 + 1) * (TMR2 Prescale Value)
• Duty Cycle = TOSC * (CCPR1L<7:0>:CCP1CON<5:4>) * (TMR2 Prescale Value)
• Delay = 4 * TOSC * (PWM1CON<6:0>)
Note 1: Dead-band delay is programmed using the PWM1CON register (Section 15.5.6 “Programmable Dead-Band
Delay”).
© 2007 Microchip Technology Inc.
DS39605F-page 121