PIC18F1220_07 Datasheet, PDF (194/308 Pages) Microchip Technology – 18/20/28-Pin High-Performance, Enhanced Flash Microcontrollers with 10-bit A/D and nanoWatt Technology

PIC18F1220/1320
TABLE 20-1: OPCODE FIELD DESCRIPTIONS
Field
Description
a
bbb
BSR
d
dest
f
fs
fd
k
label
mm
*
*+
*-
+*
n
PRODH
PRODL
s
u
WREG
x
TBLPTR
TABLAT
TOS
PC
PCL
PCH
PCLATH
PCLATU
GIE
WDT
TO
PD
C, DC, Z, OV, N
[]
()
→
<>
∈
italics
RAM access bit
a = 0: RAM location in Access RAM (BSR register is ignored)
a = 1: RAM bank is specified by BSR register
Bit address within an 8-bit file register (0 to 7).
Bank Select Register. Used to select the current RAM bank.
Destination select bit
d = 0: store result in WREG
d = 1: store result in file register f
Destination either the WREG register or the specified register file location.
8-bit register file address (0x00 to 0xFF).
12-bit register file address (0x000 to 0xFFF). This is the source address.
12-bit register file address (0x000 to 0xFFF). This is the destination address.
Literal field, constant data or label (may be either an 8-bit, 12-bit or a 20-bit value).
Label name.
The mode of the TBLPTR register for the table read and table write instructions.
Only used with table read and table write instructions:
No change to register (such as TBLPTR with table reads and writes)
Post-Increment register (such as TBLPTR with table reads and writes)
Post-Decrement register (such as TBLPTR with table reads and writes)
Pre-Increment register (such as TBLPTR with table reads and writes)
The relative address (2’s complement number) for relative branch instructions, or the direct address for
call/branch and return instructions.
Product of Multiply High Byte.
Product of Multiply Low Byte.
Fast Call/Return mode select bit
s = 0: do not update into/from shadow registers
s = 1: certain registers loaded into/from shadow registers (Fast mode)
Unused or unchanged.
Working register (accumulator).
Don’t care (‘0’ or ‘1’).
The assembler will generate code with x = 0. It is the recommended form of use for compatibility with all
Microchip software tools.
21-bit Table Pointer (points to a program memory location).
8-bit Table Latch.
Top-of-Stack.
Program Counter.
Program Counter Low Byte.
Program Counter High Byte.
Program Counter High Byte Latch.
Program Counter Upper Byte Latch.
Global Interrupt Enable bit.
Watchdog Timer.
Time-out bit.
Power-down bit.
ALU Status bits: Carry, Digit Carry, Zero, Overflow, Negative.
Optional.
Contents.
Assigned to.
Register bit field.
In the set of.
User defined term (font is Courier).
DS39605F-page 192
© 2007 Microchip Technology Inc.