English
Language : 

LM3S610_06 Datasheet, PDF (31/396 Pages) List of Unclassifed Manufacturers – Microcontroller
LM3S610 Data Sheet
1.4.7.3
1.4.8
The LMI JTAG controller works with the ARM JTAG controller built into the Cortex-M3 core. This is
implemented by multiplexing the TDO outputs from both JTAG controllers. ARM JTAG instructions
select the ARM TDO output while LMI JTAG instructions select the LMI TDO outputs. The
multiplexer is controlled by the LMI JTAG controller, which has comprehensive programming for
the ARM, LMI, and unimplemented JTAG instructions.
System Control and Clocks (Section 6 on page 51)
System control determines the overall operation of the device. It provides information about the
device, controls the clocking of the device and individual peripherals, and handles reset detection
and reporting.
Hardware Details
Details on the pins and package can be found in the following sections:
„ Section 16, “Pin Diagram,” on page 366
„ Section 17, “Signal Tables,” on page 367
„ Section 18, “Operating Characteristics,” on page 376
„ Section 19, “Electrical Characteristics,” on page 377
„ Section 20, “Package Information,” on page 390
October 8, 2006
31
Preliminary