LM3S610_06 Datasheet, PDF (114/396 Pages) List of Unclassifed Manufacturers – Microcontroller

General-Purpose Input/Outputs (GPIOs)
Table 8-3. GPIO Register Map (Continued)
Offset Name
Reset
Type Description
See
page
0xFD4 GPIOPeriphID5 0x00000000 RO Peripheral identification 5
134
0xFD8 GPIOPeriphID6 0x00000000 RO Peripheral identification 6
135
0xFDC GPIOPeriphID7 0x00000000 RO Peripheral identification 7
136
0xFE0 GPIOPeriphID0 0x00000061 RO Peripheral identification 0
137
0xFE4 GPIOPeriphID1 0x00000000 RO Peripheral identification 1
138
0xFE8 GPIOPeriphID2 0x00000018 RO Peripheral identification 2
139
0xFEC GPIOPeriphID3 0x00000001 RO Peripheral identification 3
140
0xFF0 GPIOPCellID0 0x0000000D RO GPIO PrimeCell identification 0
141
0xFF4 GPIOPCellID1 0x000000F0 RO GPIO PrimeCell identification 1
142
0xFF8 GPIOPCellID2 0x00000005 RO GPIO PrimeCell identification 2
143
0xFFC GPIOPCellID3 0x000000B1 RO GPIO PrimeCell identification 3
144
a. The default reset value for the GPIOAFSEL register is 0x00000000 for all GPIO pins, with the exception of the five JTAG pins
(PB7 and PC[3:0]. These five pins default to JTAG functionality. Because of this, the default reset value of GPIOAFSEL for
GPIO Port B is 0x00000080 while the default reset value of GPIOAFSEL for Port C is 0x0000000F.
8.5 Register Descriptions
The remainder of this section lists and describes the GPIO registers, in numerical order by
address offset.
114
October 8, 2006
Preliminary