LM3S610_06 Datasheet, PDF (216/396 Pages) List of Unclassifed Manufacturers – Microcontroller

Analog-to-Digital Converter (ADC)
Register 11: ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0), offset 0x040
This register defines the analog input configuration for each sample in a sequence executed with
Sample Sequencer 0.
This register is 32-bits wide and contains information for eight possible samples.
ADC Sample Sequence Input Multiplexer Select 0 (ADCSSMUX0)
Offset 0x040
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
Type RO
Reset
0
15
reserved
RO
RO
0
0
14
13
MUX7
R/W
0
12
reserved
RO
RO
0
0
11
10
MUX6
reserved
MUX5
reserved
MUX4
RO
R/W
RO
RO
RO
R/W
RO
R0
RO
R/W
0
0
0
0
0
0
0
0
0
0
9
8
7
6
5
4
3
2
1
0
Type RO
Reset
0
reserved
RO
RO
0
0
MUX3
R/W
0
reserved
RO
RO
0
0
MUX2
reserved
MUX1
reserved
MUX0
RO
R/W
RO
RO
RO
R/W
RO
R0
RO
R/W
0
0
0
0
0
0
0
0
0
0
Bit/Field
31:29
Name
reserved
28
MUX7
27:25
24
reserved
MUX6
23:21
20
reserved
MUX5
19:17
16
reserved
MUX4
15:13
12
reserved
MUX3
Type
RO
R/W
RO
R/W
RO
R/W
RO
R/W
RO
R/W
Reset
0
0
0
0
0
0
0
0
0
0
Description
Reserved bits return an indeterminate value, and should never be
changed.
The MUX7 field is used during the eighth sample of a sequence
executed with Sample Sequencer 0. It specifies which of the
analog inputs is sampled for the analog-to-digital conversion. The
value set here indicates the corresponding pin, for example, a
value of 1 indicates the input is ADC1.
Reserved bits return an indeterminate value, and should never be
changed.
The MUX6 field is used during the seventh sample of a sequence
executed with Sample Sequencer 0 and specifies which of the
analog inputs is sampled for the analog-to-digital conversion.
Reserved bits return an indeterminate value, and should never be
changed.
The MUX5 field is used during the sixth sample of a sequence
executed with Sample Sequencer 0 and specifies which of the
analog inputs is sampled for the analog-to-digital conversion.
Reserved bits return an indeterminate value, and should never be
changed.
The MUX4 field is used during the fifth sample of a sequence
executed with Sample Sequencer 0 and specifies which of the
analog inputs is sampled for the analog-to-digital conversion.
Reserved bits return an indeterminate value, and should never be
changed.
The MUX3 field is used during the fourth sample of a sequence
executed with Sample Sequencer 0 and specifies which of the
analog inputs is sampled for the analog-to-digital conversion.
216
October 8, 2006
Preliminary