TLK10081 Datasheet, PDF (43/62 Pages) Texas Instruments – 10Gbps 1-8 CHANNEL MULTI-RATE SERIAL LINK AGGREGATOR

TLK10081
www.ti.com
SLLSEE9 – NOVEMBER 2013
Table 6-37. HS_CH_CONTROL_1 (continued)
Register Address:0x1D SPACER Default: 0x0880
Bit(s) Name
Description
1:0
HS_CH_SYNC_HYSTERESIS[1:0] Channel synchronization hysteresis control on the HS receive channel.
00 = The channel synchronization, when in the synchronization state, performs
the Ethernet standard specified hysteresis to return to the unsynchronized
state (Default 2’b00)
01 = A single 8b/10b invalid decode error or disparity error causes the channel
synchronization state machine to immediately transition from sync to unsync
10 = Two adjacent 8b/10b invalid decode errors or disparity errors cause the
channel synchronization state machine to immediately transition from sync to
unsync
11 = Three adjacent 8b/10b invalid decode errors or disparity errors cause the
channel synchronization state machine to immediately transition from sync to
unsync
Access
RW
Table 6-38. EXT_ADDRESS_CONTROL
Register Address:0x1E SPACER Default: 0x0000
Bit(s) Name
Description
15:0
EXT_ADDR_CONTROL[15:0] Applicable in Clause 22 mode only. This register should be written with the
extended register address to be written/read. Contents of address written in this
register can be accessed from Reg 31 (0x1F). (Default 16’h0000)
Access
RW
Table 6-39. EXT_ADDRESS_DATA
Register Address:0x1F SPACER Default: 0x0000
Bit(s) Name
Description
15:0
EXT_ADDR_DATA[15:0]
Applicable in Clause 22 mode only. This register contains the data associated with
the register address written in Register 30 (0x1E)
Access
RW
Table 6-40. VS_TX_MARKER_SEARCH_CHAR
Register Address:0x8000 SPACER Default: 0x02BC
Bit(s) Name
Description
9:0
TX_SEARCH_MARKER[9:0] TX Search marker character (Default 10’h2BC)
Access
RW
Table 6-41. VS_TX_MARKER_REPLACE_CHAR
Register Address:0x8001 SPACER Default: 0x027C
Bit(s) Name
Description
9:0
TX_REPLACE_MARKER[9:0] TX Replace marker character (Default 10’h27C)
Access
RW
Table 6-42. VS_RX_MARKER_SEARCH_CHAR
Register Address:0x8002 SPACER Default: 0x027C
Bit(s) Name
Description
9:0
RX_SEARCH_MARKER[9:0] RX Search marker character (Default 10’h27C)
Access
RW
Table 6-43. VS_RX_MARKER_REPLACE_CHAR
Register Address:0x8003SPACER Default: 0x02BC
Bit(s) Name
Description
9:0
RX_REPLACE_MARKER[9:0] RX Replace marker character (Default 10’h2BC)
Access
RW
Copyright © 2013, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TLK10081
PROGRAMMERS REFERENCE
43