TLK10081 Datasheet, PDF (24/62 Pages) Texas Instruments – 10Gbps 1-8 CHANNEL MULTI-RATE SERIAL LINK AGGREGATOR

TLK10081
SLLSEE9 – NOVEMBER 2013
www.ti.com
6.2 Register Bit Definitions
RW: Read-Write
User can write 0 or 1 to this register bit. Reading this register bit returns the same value that has been
written.
RW/SC: Read-Write Self-Clearing
User can write 0 or 1 to this register bit. Writing a "1" to this register creates a high pulse. Reading this
register bit always returns 0.
RO: Read-Only
This register can only be read. Writing to this register bit has no effect. Reading from this register bit
returns its current value.
RO/LH: Read-Only Latched High
This register can only be read. Writing to this register bit has no effect. Reading a "1" from this register bit
indicates that either the condition is occurring or it has occurred since the last time it was read. Reading a
"0" from this register bit indicates that the condition is not occurring presently, and it has not occurred
since the last time the register was read. A latched high register, when read high, should be read again to
distinguish if a condition occurred previously or is still occurring. If it occurred previously, the second read
will read low. If it is still occurring, the second read will read high. Reading this register bit automatically
resets its value to 0.
RO/LL: Read-Only Latched Low
This register can only be read. Writing to this register bit has no effect. Reading a "0" from this register bit
indicates that either the condition is occurring or it has occurred since the last time it was read. Reading a
"1" from this register bit indicates that the condition is not occurring presently, and it has not occurred
since the last time the register was read. A latched low register, when read low, should be read again to
distinguish if a condition occurred previously or is still occurring. If it occurred previously, the second read
will read high. If it is still occurring, the second read will read low. Reading this register bit automatically
sets its value to 1.
COR: Clear-On-Read counter
This register can only be read. Writing to this register bit has no effect. Reading from this register bit
returns its current value, then resets its value to 0. Counter value freezes at Max.
24
PROGRAMMERS REFERENCE
Submit Documentation Feedback
Product Folder Links: TLK10081
Copyright © 2013, Texas Instruments Incorporated