K522H1HACF-B050 Datasheet, PDF (14/94 Pages) Samsung semiconductor – MCP Specification

K522H1HACF-B050
datasheet
Rev. 1.0
MCP Memory
1.1 ABSOLUTE MAXIMUM RATINGS
Parameter
Voltage on any pin relative to V_SS
Temperature Under Bias
Storage Temperature
Short Circuit Current
Symbol
V_CC
V_IN
V_I/O
T_BIAS
T_STG
I_OS
Rating
-0.6 to + 2.45
-0.6 to + 2.45
-0.6 to Vcc + 0.3 (< 2.45V)
-30 to +125
-65 to +150
5
NOTE :
1) Minimum DC voltage is -0.6V on input/output pins. During transitions, this level may undershoot to -2.0V for periods <30ns.
Maximum DC voltage on input/output pins is VCC+0.3V which, during transitions, may overshoot to VCC+2.0V for periods <20ns.
2) Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. Functional operation should be restricted to the conditions
as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
Unit
V
°C
°C
mA
1.2 RECOMMENDED OPERATING CONDITIONS
(Voltage reference to GND, TA=-25 to 85°C)
Parameter
Symbol
Min
Typ.
Max
Unit
Supply Voltage
V_CC
1.7
1.8
1.95
V
Supply Voltage
V_SS
0
0
0
V
1.3 DC AND OPERATING CHARACTERISTICS
(Recommended operating conditions otherwise noted.)
Parameter
Symbol
Test Conditions
Operating
Current
Page Read with Serial
Access
I_CC1
t_RC=42ns
CE=V_IL, I_OUT=0mA
Program
I_CC2
-
Erase
I_CC3
-
Stand-by Current(TTL)
2Gb,CE=V_IH, WP=0V/V_CC
I_SB1
4Gb DDP,CE=V_IH, WP=0V/V_CC
Stand-by Current(CMOS)
2Gb,CE=V_CC-0.2, WP=0V/V_CC
I_SB2
4Gb DDP,CE=V_CC-0.2, WP=0V/V_CC
Input Leakage Current
I_LI
V_IN=0 to V_cc(max)
Output Leakage Current
I_LO V_OUT=0 to V_cc(max)
Input High Voltage
V_IH ¹⁾
-
Input Low Voltage, All inputs
V_IL ¹⁾
-
Output High Voltage Level
V_OH I_OH=-100μA
Output Low Voltage Level
V_OL I_OL=100uA
Output Low Current(R/B)
I_OL(R/B) V_OL=0.1V
NOTE :
1) VIL can undershoot to -0.4V and VIH can overshoot to VCC +0.4V for durations of 20 ns or less.
2) Typical value is measured at Vcc=1.8V, TA=25°C. Not 100% tested.
Min
-
-
-
-
-
-
-
-
-
0.8xV_CC
-0.3
V_CC-0.1
-
3
Typ
Max
Unit
15
25
mA
-
1
-
2
10
50
20
100
μA
-
±10
-
±10
-
V_CC+0.3
-
0.2xVcc
V
-
-
-
0.1
4
-
mA
- 14 -