HD64F3664FPV Datasheet, PDF (86/446 Pages) Renesas Technology Corp – Old Company Name in Catalogs and Other Documents

Section 3 Exception Handling
3.2.4 Interrupt Flag Register 1 (IRR1)
IRR1 is a status flag register for direct transition interrupts, timer A overflow interrupts, and IRQ3
to IRQ0 interrupt requests.
Initial
Bit
Bit Name Value R/W Description
7
IRRDT
0
R/W Direct Transfer Interrupt Request Flag
[Setting condition]
When a direct transfer is made by executing a SLEEP
instruction while DTON in SYSCR2 is set to 1.
[Clearing condition]
When IRRDT is cleared by writing 0
6
IRRTA
0
R/W Timer A Interrupt Request Flag
[Setting condition]
When the timer A counter value overflows
[Clearing condition]
When IRRTA is cleared by writing 0
5

1

Reserved
4

1

These bits are always read as 1.
3
IRRI3
0
R/W IRQ3 Interrupt Request Flag
[Setting condition]
When IRQ3 pin is designated for interrupt input and
the designated signal edge is detected.
[Clearing condition]
When IRRI3 is cleared by writing 0
2
IRRI2
0
R/W IRQ2 Interrupt Request Flag
[Setting condition]
When IRQ2 pin is designated for interrupt input and
the designated signal edge is detected.
[Clearing condition]
When IRRI2 is cleared by writing 0
1
IRRI1
0
R/W IRQ1 Interrupt Request Flag
[Setting condition]
When IRQ1 pin is designated for interrupt input and
the designated signal edge is detected.
[Clearing condition]
When IRRI1 is cleared by writing 0
Rev. 6.00 Mar. 24, 2006 Page 56 of 412
REJ09B0142-0600