M16C6N4 Datasheet, PDF (329/406 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES

Under development
This document is under development and its contents are subject to change.
M16C/6N Group (M16C/6N4)
22. Electric Characteristics (Normal-ver.)
Table 22.32 Electrical Characteristics (1) ⁽¹⁾
VCC = 5V
Symbol
Parameter
Measuring Condition
Standard
Min. Typ. Max.
Unit
VOH HIGH Output P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, IOH = –5mA
Voltage
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
VCC-2.0
VCC V
P6_0 to P6_7, P7_0, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0,
P9_2 to P9_7, P10_0 to P10_7
VOH HIGH Output P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, IOH = –200µA
Voltage
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
VCC-0.3
VCC V
P6_0 to P6_7, P7_0, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0,
P9_2 to P9_7, P10_0 to P10_7
VOH HIGH Output XOUT HIGHPOWER
Voltage
LOWPOWER
IOH = –1mA
3.0
IOH = –0.5mA
3.0
VCC V
VCC
HIGH Output XCOUT HIGHPOWER
Voltage
LOWPOWER
With no load applied
2.5
V
With no load applied
1.6
VOL
LOW Output P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, ^{IOL = 5mA}
Voltage
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
2.0 V
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
VOL
LOW Output P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, ^{IOL = 200µA}
Voltage
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
0.45 ^V
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
VOL
LOW Output XOUT HIGHPOWER
Voltage
LOWPOWER
IOL = 1mA
IOL = 0.5mA
2.0 ^V
2.0
LOW Output XCOUT HIGHPOWER
With no load applied
0
V
Voltage
VT+-VT- ^Hysteresis
LOWPOWER
With no load applied
0
_________ _______
HOLD, RDY, TA0IN to TA4IN, TB0IN to TB5IN,
0.2
1.0 ^V
________ ________ _______ _____________ _________ _________
INT0 to INT5, NMI, ADTRG, CTS0 to CTS2,
SCL0 to SCL2, SDA0 to SDA2, CLK0 to CLK3,
_____
_____
TA0OUT to TA4OUT, KI0 to KI3,
VT+-VT- ^Hysteresis
VT+-VT- Hysteresis
IIH
HIGH Input
Current
RXD0 to RXD2, SIN3
_____________
RESET
XIN
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, VI = 5V
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
0.2
2.5 V
0.2
0.8 V
5.0 µA
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
____________
XIN, RESET, CNVSS, BYTE
IIL
LOW Input
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, VI = 0V
Current
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
–5.0 µA
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
____________
XIN, RESET, CNVSS, BYTE
RPULLUP Pull-up
Resistance
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, VI = 0V
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
30 50 170 kΩ
P6_0 to P6_7, P7_0, P7_2 to P7_7, P8_0 to
P8_4, P8_6, P8_7, P9_0, P9_2 to P9_7,
P10_0 to P10_7
RfXIN
RfXCIN
VRAM
Feedback Resistance
Feedback Resistance
RAM Retention Voltage
XIN
XCIN
1.5
MΩ
15
MΩ
At stop mode
2.0
V
NOTES:
1. Referenced to VCC = 4.2 to 5.5V, VSS = 0V at Topr = –40 to 85°C, f(BCLK) = 24MHz unless otherwise specified.
Rev.2.30 Oct 24, 2005 page 311 of 376
REJ09B0009-0230