M16C6N4 Datasheet, PDF (304/406 Pages) Renesas Technology Corp – 16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY / M16C/60 SERIES

Under development
This document is under development and its contents are subject to change.
M16C/6N Group (M16C/6N4)
22. Electric Characteristics (T/V-ver.)
Table 22.2 Recommended Operating Conditions (1) ⁽¹⁾
Symbol
Parameter
Standard
Unit
Min. Typ. Max.
VCC
Supply Voltage (VCC1 = VCC2)
4.2
5.0
5.5 V
AVCC
VSS
AVSS
VIH
Analog Supply Voltage
VCC
V
Supply Voltage
0
V
Analog Supply Voltage
0
V
HIGH Input _{P3_1 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7,} 0.8VCC
VCC
V
Voltage
P7_0, P7_2 to P7_7, P8_0 to P8_7, P9_0, P9_2 to P9_7,
_____________
P10_0 to P10_7, XIN, RESET, CNVSS, BYTE
P7_1, P9_1
0.8VCC
6.5 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 0.8VCC
VCC
V
(During single-chip mode)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
0.5VCC
VCC
V
(Data input during memory expansion and microprocessor modes)
VIL
LOW Input P3_1 to P3_7, P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, 0
Voltage
P7_0 to P7_7, P8_0 to P8_7, P9_0 to P9_7, P10_0 to P10_7,
_____________
XIN, RESET, CNVSS, BYTE
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
0
0.2VCC V
0.2VCC V
(During single-chip mode)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
0
0.16VCC V
IOH(peak)
(Data input during memory expansion and microprocessor modes)
HIGH Peak P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
–10.0 mA
Output Current P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0,
P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_0,
IOH(avg)
P9_2 to P9_7, P10_0 to P10_7
HIGH Average P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
–5.0 mA
Output Current P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0,
P7_2 to P7_7, P8_0 to P8_4, P8_6, P8_7, P9_0,
IOL(peak)
P9_2 to P9_7, P10_0 to P10_7
LOW Peak P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
Output Current P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7,
10.0 mA
IOL(avg)
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
LOW Average P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
Output Current P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7
5.0 mA
NOTES:
1. Referenced to VCC = 4.2 to 5.5V at Topr = –40 to 85°C unless otherwise specified.
2. The mean output current is the mean value within 100 ms.
3. The total IOL(peak) for ports P0, P1, P2, P8_6, P8_7, P9 and P10 must be 80mA max.
The total IOL(peak) for ports P3, P4, P5, P6, P7 and P8_0 to P8_4 must be 80mA max.
The total IOH(peak) for ports P0, P1, and P2 must be –40mA max.
The total IOH(peak) for ports P3, P4 and P5 must be –40mA max.
The total IOH(peak) for ports P6, P7 and P8_0 to P8_4 must be –40mA max.
The total IOH(peak) for ports P8_6, P8_7, P9 and P10 must be –40mA max.
Rev.2.30 Oct 24, 2005 page 286 of 376
REJ09B0009-0230