English
Language : 

PIC18F87K90 Datasheet, PDF (75/566 Pages) Microchip Technology – 64/80-Pin, High-Performance Microcontrollers with LCD Driver and nanoWatt XLP Technology
PIC18F87K90 FAMILY
TABLE 5-2: INITIALIZATION CONDITIONS FOR ALL REGISTERS (CONTINUED)
Register
Applicable Devices
Power-on Reset,
Brown-out Reset
MCLR Resets,
WDT Reset,
RESET Instruction,
Stack Resets,
CM Resets
Wake-up via WDT
or Interrupt
ECCP1DEL PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
CCPR1H
PIC18F6XK90 PIC18F8XK90
xxxx xxxx
uuuu uuuu
uuuu uuuu
CCPR1L
PIC18F6XK90 PIC18F8XK90
xxxx xxxx
uuuu uuuu
uuuu uuuu
CCP1CON
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
PIR5
PIE5
PIC18F6XK90 PIC18F8XK90
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
0000 0000
0000 0000
uuuu uuuu
uuuu uuuu(1)
IPR4
PIR4
PIC18F6XK90 PIC18F8XK90
PIC18F6XK90 PIC18F8XK90
1111 1111
0000 0000
1111 1111
0000 0000
uuuu uuuu
uuuu uuuu(1)
PIE4
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
CVRCON
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
CMSTAT
PIC18F6XK90 PIC18F8XK90
111- ----
111- ----
uuu- ----
TMR3H
PIC18F6XK90 PIC18F8XK90
xxxx xxxx
uuuu uuuu
uuuu uuuu
TMR3L
PIC18F6XK90 PIC18F8XK90 xxxx xxxx
uuuu uuuu
uuuu uuuu
T3CON
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0x00
0000 0x00
T3GCON
PIC18F6XK90 PIC18F8XK90
0000 0x00
0000 0x00
uuuu uuuu
SPBRG1
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
RCREG1
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
TXREG1
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
TXSTA1
PIC18F6XK90 PIC18F8XK90
0000 0010
0000 0010
uuuu uuuu
RCSTA1
PIC18F6XK90 PIC18F8XK90
0000 000x
0000 000x
uuuu uuuu
T1GCON
PIC18F6XK90 PIC18F8XK90
0000 0x00
0000 0x00
uuuu uuuu
IPR6
PIC18F6XK90 PIC18F8XK90
---1 -111
---1 -111
---u -uuu
HLVDCON
PIC18F6XK90 PIC18F8XK90
0000 0101
0000 0101
uuuu uuuu
PIR6
PIC18F6XK90 PIC18F8XK90
---0 -000
---0 -000
---u -uuu
IPR3
PIC18F6XK90 PIC18F8XK90
1111 1111
1111 1111
uuuu uuuu
PIR3
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
PIE3
PIC18F6XK90 PIC18F8XK90
0000 0000
0000 0000
uuuu uuuu
IPR2
PIC18F6XK90 PIC18F8XK90
1-11 1111
1-11 1111
u-uu uuuu
PIR2
PIC18F6XK90 PIC18F8XK90
0-00 0000
0-00 0000
u-uu uuuu
PIE2
PIC18F6XK90 PIC18F8XK90
0-00 0000
0-00 0000
u-uu uuuu
IPR1
PIC18F6XK90 PIC18F8XK90
-111 1111
-111 1111
-uuu uuuu
PIR1
PIC18F6XK90 PIC18F8XK90
-000 0000
-000 0000
-uuu uuuu
PIE1
PIC18F6XK90 PIC18F8XK90
-000 0000
-000 0000
-uuu uuuu
Legend: u = unchanged, x = unknown, - = unimplemented bit, read as ‘0’, q = value depends on condition.
Shaded cells indicate conditions do not apply for the designated device.
Note 1: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the TOSU, TOSH and TOSL are
updated with the current value of the PC. The STKPTR is modified to point to the next location in the
hardware stack.
2: When the wake-up is due to an interrupt and the GIEL or GIEH bit is set, the PC is loaded with the interrupt
vector (0008h or 0018h).
3: One or more bits in the INTCONx or PIRx registers will be affected (to cause wake-up).
4: See Table 5-1 for Reset value for specific condition.
 2010 Microchip Technology Inc.
Preliminary
DS39957B-page 75