English
Language : 

PIC18F87K90 Datasheet, PDF (403/566 Pages) Microchip Technology – 64/80-Pin, High-Performance Microcontrollers with LCD Driver and nanoWatt XLP Technology
PIC18F87K90 FAMILY
26.6 Operation During Sleep
When enabled, the HLVD circuitry continues to operate
during Sleep. If the device voltage crosses the trip
point, the HLVDIF bit will be set and the device will
wake-up from Sleep. Device execution will continue
from the interrupt vector address if interrupts have
been globally enabled.
26.7 Effects of a Reset
A device Reset forces all registers to their Reset state.
This forces the HLVD module to be turned off.
TABLE 26-1: REGISTERS ASSOCIATED WITH HIGH/LOW-VOLTAGE DETECT MODULE
Name
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Reset
Values on
Page:
HLVDCON VDIRMAG BGVST IRVST HLVDEN HLVDL3 HLVDL2 HLVDL1 HLVDL0
75
INTCON GIE/GIEH PEIE/GIEL TMR0IE INT0IE RBIE TMR0IF INT0IF RBIF
73
PIR2
OSCFIF
—
SSP2IF BLC2IF BCL1IF HLVDIF TMR3IF TMR3GIF 75
PIE2
OSCFIE
—
SSP2IE BLC2IE BCL1IE HLVDIE TMR3IE TMR3GIE 75
IPR2
TRISA
OSCFIP
—
SSP2IP BLC2IP BCL1IP HLVDIP TMR3IP TMR3GIP 75
TRISA7(1) TRISA6(1) TRISA5 TRISA4 TRISA3 TRISA2 TRISA1 TRISA0
76
Legend: — = unimplemented, read as ‘0’. Shaded cells are unused by the HLVD module.
Note 1: PORTA<7:6> and their direction bits are individually configured as port pins based on various primary
oscillator modes. When disabled, these bits read as ‘0’.
 2010 Microchip Technology Inc.
Preliminary
DS39957B-page 403