PIC18F87K90 Datasheet, PDF (513/566 Pages) Microchip Technology – 64/80-Pin, High-Performance Microcontrollers with LCD Driver and nanoWatt XLP Technology

PIC18F87K90 FAMILY
31.2 DC Characteristics: Power-Down and Supply Current
PIC18F87K90 Family (Industrial) (Continued)
PIC18F87K90 Family
(Industrial)
Standard Operating Conditions (unless otherwise stated)
Operating temperature
-40°C  TA  +85°C for industrial
Param
No.
Device
Typ
Max Units
Conditions
D022
(IWDT)
Module Differential Currents (IWDT, IBOR, IHLVD, IOSCB, IAD)
Watchdog Timer
PIC18FXXK90 0.3
1
A
-40°C
0.3
1
A
+25°C
0.3
1
A
+85°C
VDD = 1.8V⁽⁴⁾
Regulator Disabled
PIC18FXXK90 0.6
0.6
0.6
1.9 A
1.8 A
1.8 A
-40°C
+25°C
+85°C
VDD = 3.3V⁽⁴⁾
Regulator Disabled
PIC18FXXK90 0.6
0.6
0.6
1.8 A
1.8 A
1.8 A
-40°C
+25°C
+85°C
VDD = 5V⁽⁵⁾
Regulator Enabled
D022A
(IBOR)
Brown-out Reset
PIC18FXXK90 4.6
4.5
4.7
19 A
20 A
20 A
-40°C
+25°C
+85°C
VDD = 3.3V⁽⁴⁾
Regulator Disabled
High-Power BOR
PIC18FXXK90 4.2
4.3
4.4
20 A
20 A
20 A
-40°C
+25°C
+85°C
VDD = 5V⁽⁵⁾
Regulator Enabled
High-Power BOR
D022B High/Low-Voltage Detect
(IHLVD)
PIC18FXXK90 3.8
4.2
4.3
9
A
9
A
10 A
-40°C
+25°C
+85°C
VDD = 1.8V⁽⁴⁾
Regulator Disabled
PIC18FXXK90 ^4.5
4.8
4.8
11 A
12 A
12 A
-40°C
+25°C
+85°C
VDD = 3.3V⁽⁴⁾
Regulator Disabled
PIC18FXXK90 ^4.9
4.9
4.9
13 A
13 A
13 A
-40°C
+25°C
+85°C
VDD = 5V⁽⁵⁾
Regulator Enabled
Note 1:
2:
3:
4:
5:
6:
The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is measured with
the part in Sleep mode, with all I/O pins in a high-impedance state and tied to VDD or VSS, and all features that add delta
current are disabled (such as WDT, SOSC oscillator, BOR, etc.).
The supply current is mainly a function of operating voltage, frequency and mode. Other factors, such as I/O pin loading
and switching rate, oscillator type and circuit, internal code execution pattern and temperature, also have an impact on
the current consumption.
The test conditions for all IDD measurements in active operation mode are:
OSC1 = external square wave, from rail-to-rail; all I/O pins tri-stated, pulled to VDD;
MCLR = VDD; WDT enabled/disabled as specified.
Standard, low-cost 32 kHz crystals have an operating temperature range of -10°C to +70°C. Extended temperature
crystals are available at a much higher cost.
Voltage regulator disabled (ENVREG = 0, tied to VSS, RETEN (CONFIG1L<0>) = 1).
Voltage regulator enabled (ENVREG = 1, tied to VDD, SRETEN (WDTCON<4>) = 1 and RETEN (CONFIG1L<0>) = 0).
LCD glass is not connected; resistor current is not included.
 2010 Microchip Technology Inc.
Preliminary
DS39957B-page 513