71M6545 Datasheet, PDF (24/134 Pages) Maxim Integrated Products – Four-Quadrant Metering, Phase Metrology Processors Flash/RAM Size

Data Sheet 71M6545/H
PDS_6545_009
Name
Address
RST WAKE
Default Default
R/W Description
CHOPR[1:0] 2709[7:6] 00
The CHOP settings for the isolated sensors.
00 – Auto chop. Change every multiplexer frame.
00 R/W 01 – Positive
10 – Negative
11 – Same as 00
TMUXR2[2:0] 270A[2:0] 000
000 R/W The TMUX bits for control of the isolated sensor.
TMUXR4[2:0] 270A[6:4] 000
000 R/W The TMUX bits for control of the isolated sensor.
TMUXR6[2:0] 2709[2:0] 000
000 R/W The TMUX bits for control of the isolated sensor.
RMT_RD[15:8] 2602[7:0]
RMT_RD[7:0] 2603[7:0]
0
0
R The read buffer for 71M6xx3 read operations.
RFLY_DIS 210C[3]
0
Controls how the 71M6545/H drives the 71M6xx3
0
R/W
power pulse. When set, the power pulse is driven
high and low. When cleared, it is driven high
followed by an open circuit flyback interval.
RMT2_E
2709[3]
0
Enables the isolated remote sensor interface and
0 R/W re-configures pins IADC2-IADC3 as a balanced
pair digital remote interface.
RMT4_E
2709[4]
0
Enables the isolated remote sensor interface and
0 R/W re-configures pins IADC4-IADC5 as a balanced
pair digital remote interface.
RMT6_E
2709[5]
0
Enables the isolated remote sensor interface and
0 R/W re-configures pins IADC6-IADC7 as a balanced
pair digital remote interface.
Refer to Table 61 starting on page 88 for more complete details about these I/O RAM locations.
24
© 2008–2011 TERIDIAN Semiconductor Corporation
v1.0