71M6545 Datasheet, PDF (113/134 Pages) Maxim Integrated Products – Four-Quadrant Metering, Phase Metrology Processors Flash/RAM Size

PDS_6545_009
Data Sheet 71M6545/H
6 71M6545/H SPECIFICATIONS
This section provides the electrical specifications for the 71M6545/H. Please refer to the 71M6xxx Data
Sheet for the 71M6xx3 electrical specifications, pin-out and package mechanical data.
6.1 Absolute Maximum Ratings
Table 78 shows the absolute maximum ranges for the device. Stresses beyond Absolute Maximum Ratings
may cause permanent damage to the device. These are stress ratings only and functional operation at
these or any other conditions beyond those indicated under recommended operating conditions (See 6.3)
is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability. All voltages are with respect to GNDA.
Table 78: Absolute Maximum Ratings
Supplies and Ground Pins
V3P3SYS, V3P3A
VBAT_RTC
GNDD
Analog Output Pins
VREF
Voltage and Current
VDD
V3P3D
Analog Input Pins
IADC0, IADC1, IADC2, IADC3, IADC4, IADC5, IADC6, IADC7, VADC8,
VADC9 and VADC10
XIN, XOUT
DIO Pins
Configured as Digital Inputs
Configured as Digital Outputs
Digital Pins
Inputs (PB, RESET, RX, ICE_E, TEST)
Outputs (TX)
Temperature and ESD Stress
Operating junction temperature (peak, 100ms)
Operating junction temperature (continuous)
Storage temperature
Solder temperature – 10 second duration
−0.5 V to +4.6 V
-0.5 V to +4.6 V
-0.1 V to +0.1 V
-10 mA to +10 mA,
-0.5 V to V3P3A+0.5 V
-10 mA to +10 mA,
-0.5 to +3.0 V
-10 mA to +10 mA,
-0.5 V to +4.6 V
-10 mA to +10 mA
-0.5 V to V3P3A+0.5 V
-10 mA to +10 mA
-0.5 V to +3.0 V
-10 mA to +10 mA,
-0.5 V to +6 V
-10 mA to +10 mA,
-0.5 V to V3P3D+0.5 V
-10 mA to +10 mA,
-0.5 to 6 V
-10 mA to +10 mA,
-0.5 V to V3P3D+0.5 V
140 °C
125 °C
−45 °C to +165 °C
250 °C
v1.0
© 2008–2011 Teridian Semiconductor Corporation
113