MC9S08DZ128 Datasheet, PDF (37/458 Pages) Freescale Semiconductor, Inc – Microcontrollers

Chapter 2 Pins and Connections
Table 2-1. Pin Availability by Package Pin-Count (continued)
Pin Number
<-- Lowest Priority --> Highest
100 64 48
Port
Pin/Interrupt
Alt 1
Alt 2
89 57
43
90 58
91 — — PTK4
V_REFH
V_DDA
92 — — PTK5
93 — — PTK6
94 — — PTK7
95 59 44 PTA4
PIA4
ADP4
96 60 45 PTB4
PIB4
ADP12
97 61 — PTC4
ADP20
98 62 46 PTA5
PIA5
ADP5
99 63 47 PTB5
PIB5
ADP13
100 64 48 PTA6
PIA6
ADP6
1 _{Pin does not contain a clamp diode to VDD and should not be driven above}
V_DD. The voltage measured on this pin when internal pull-up is enabled may
be as low as V_DD - 0.7V. The internal gates connected to this pin are pulled to
V_DD.
2 _{The IIC1 module pins can be repositioned using IIC1PS bit in the SOPT1}
register. The default reset locations are on PTF2 and PTF3.
3 _{The SCI2 module pins can be repositioned using SCI2PS bit in the SOPT1}
register. The default reset locations are on PTF0 and PTF1.
4 _{If both these analog modules are enabled they both will have access to the pin.}
MC9S08DZ128 Series Data Sheet, Rev. 1
Freescale Semiconductor
37