MC9S08DZ128 Datasheet, PDF (176/458 Pages) Freescale Semiconductor, Inc – Microcontrollers

Chapter 8 Multi-Purpose Clock Generator (S08MCGV2)
Table 8-7. MCG Control Register 3 Field Descriptions (continued)
Field
4
DIV32
3:0
VDIV
Description
Divide-by-32 Enable — Controls an additional divide-by-32 factor to the external reference clock for the FLL
when RANGE bit is set. When the RANGE bit is 0, this bit has no effect. Writes to this bit are ignored if PLLS bit
is set.
0 Divide-by-32 is disabled.
1 Divide-by-32 is enabled when RANGE=1.
VCO Divider — Selects the amount to divide down the VCO output of PLL. The VDIV bits establish the
multiplication factor (M) applied to the reference clock frequency.
0000 Encoding 0 — Reserved.
0001 Encoding 1 — Multiply by 4.
0010 Encoding 2 — Multiply by 8.
0011 Encoding 3 — Multiply by 12.
0100 Encoding 4 — Multiply by 16.
0101 Encoding 5 — Multiply by 20.
0110 Encoding 6 — Multiply by 24.
0111 Encoding 7 — Multiply by 28.
1000 Encoding 8 — Multiply by 32.
1001 Encoding 9 — Multiply by 36.
1010 Encoding 10 — Multiply by 40.
1011 Encoding 11 — Reserved (default to M=40).
11xx Encoding 12-15 — Reserved (default to M=40).
MC9S08DZ128 Series Data Sheet, Rev. 1
176
Freescale Semiconductor