|
XRT7250 Datasheet, PDF (430/463 Pages) Exar Corporation – DS3/E3 FRAMER IC | |||
|
◁ |
áç
XRT7250
DS3/E3 FRAMER IC
REV. 1.1.1
FIGURE 201. FLOW CHART DEPICTING THE FUNCTIONALITY OF THE LAPD RECEIVER
START
Indicate whether the LAPD Receiver should retrieve the
LAPD Message frame octets from the NR or GC byte-field,
within each incoming E3 Frame.
Enable the LAPD Receiver
The LAPD Receiver will begin searching for the Flag Sequence
octet (0x7E) in the âselectedâ byte-field (e.g., NR or GC) of each
incoming E3 frame.
Is
Flag Sequence
No
octet
Present?
Yes
Assert the âFlag Presentâ bit-field within the âRx E3 LAPD
Status Register (Address = 0x19).
Is
non-Flag Sequence Yes
octet detected
?
No
Set the âRxLAPDType[1:0] bit-fields to the appropriate value.
Continue to read in the LAPD Message frame octets
Is
Abort Sequence
Yes
Detected?
No
A
Has
No
the last byte
of the LAPD Message
frame been
received?
Yes
Set the âEnd Of Messageâ bit-field within the âRxE3
LAPD Status Register (Address = 0x19)
Unstuff the âPMDLâ portion of the LAPD Message frame.
Goto Figure 185
411
|
▷ |