DS90UB914A-Q1 Datasheet, PDF (8/61 Pages) Texas Instruments – 25-MHz to 100-MHz 10/12-Bit FPD-Link III Deserializer

DS90UB914A-Q1
SNLS499A – APRIL 2016 – REVISED JUNE 2016
www.ti.com
7.4 Thermal Information
THERMAL METRIC⁽¹⁾
DS90UB914A-Q1
RHS (WQFN)
UNIT
48 PINS
R_θJA
R_θJC(top)
R_θJB
ψ_JT
ψ_JB
R_θJC(bot)
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
29.7
10.9
6.7
°C/W
0.1
6.7
2.3
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
7.5 Electrical Characteristics^(1)(2)(3)
Over recommended operating supply and temperature ranges unless otherwise specified.
PARAMETER
TEST CONDITIONS
MIN
LVCMOS DC SPECIFICATIONS 3.3V I/O (DES OUTPUTS, GPIO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input Voltage V_IN = 3 V to 3.6 V
V_IL
Low Level Input Voltage V_IN = 3 V to 3.6 V
I_IN
Input Current
V_IN = 0 V or 3.6 V, V_IN = 3 V to 3.6 V
V_OH
High Level Output Voltage V_DDIO = 3 V to 3.6 V, I_OH = −4 mA
V_OL
Low Level Output Voltage V_DDIO = 3 V to 3.6 V, I_OL = 4 mA
I_OS
Output Short Circuit
Current
V_OUT = 0 V
Deserializer
GPO Outputs
LVCMOS Outputs
2
GND
–20
2.4
GND
I_OZ
TRI-STATE Output
Current
PDB = 0 V,
V_OUT = 0 V or V_DD
LVCMOS Outputs,
GPO Outputs
–20
C_GPIO Pin Capacitance
GPIO [3:0]
LVCMOS DC SPECIFICATIONS 1.8V I/O (DES OUTPUTS, GPIO, CONTROL INPUTS AND OUTPUTS)
V_IH
High Level Input Voltage V_IN = 1.71 V to 1.89 V
0.65 V_IN
V_IL
Low Level Input Voltage V_IN = 1.71 V to 1.89 V
GND
I_IN
Input Current
V_IN = 0 V or 1.89 V, V_IN = 1.71 V to 1.89 V
–20
V_OH
High Level Output Voltage V_DDIO = 1.71 V to 1.89 V, I_OH = −4 mA
V_DDIO - 0.45
V_OL
Low Level Output Voltage V_DDIO = 1.71 V to 1.89 V I_OL = 4 mA
GND
I_OS
Output Short Circuit
Current
V_OUT = 0 V
Deserializer
GPO Outputs
LVCMOS Outputs
I_OZ
TRI-STATE Output
Current
PDB = 0 V,
V_OUT = 0 V or V_DD
LVCMOS Outputs,
GPO Outputs
-20
C_GPIO Pin Capacitance
GPIO [3:0]
TYP
±1
–15
–35
1.5
±1
–11
–17
1.5
MAX UNIT
V_IN
V
0.8 V
20 µA
V_DDIO
V
0.4 V
mA
20 µA
pF
V_IN
V
0.35 V_IN
20 µA
V_DDIO
V
0.45 V
mA
20 µA
pF
(1) The Electrical Characteristics tables list verified specifications under the listed Recommended Operating Conditions except as otherwise
modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not
verified.
(2) Current into device pins is defined as positive. Current out of a device pin is defined as negative. Voltages are referenced to ground
except VOD, ΔVOD, VTH and VTL which are differential voltages.
(3) Typical values represent most likely parametric norms at 1.8 V or 3.3 V, T_A = 25°C, and at the Recommended Operation Conditions at
the time of product characterization and are not verified.
8
Submit Documentation Feedback
Product Folder Links: DS90UB914A-Q1
Copyright © 2016, Texas Instruments Incorporated