DS90UB914A-Q1 Datasheet, PDF (36/61 Pages) Texas Instruments – 25-MHz to 100-MHz 10/12-Bit FPD-Link III Deserializer

DS90UB914A-Q1
SNLS499A – APRIL 2016 – REVISED JUNE 2016
www.ti.com
Register Maps (continued)
Table 6. DS90UB914A-Q1 Control Registers⁽¹⁾ (continued)
ADDR
(HEX)
0x07
NAME
SER Alias
BITS FIELD
R/W
7:1
Serializer Alias ID
RW
0 RSVD
7:1 Slave ID0
RW
0x08
Slave ID[0]
0 RSVD
7:1 Slave ID1
RW
0x09
Slave ID[1]
0 RSVD
7:1 Slave ID2
RW
0x0A
Slave ID[2]
0 RSVD
7:1 Slave ID3
RW
0x0B
Slave ID[3]
0 RSVD
7:1 Slave ID4
RW
0x0C
Slave ID[4]
0 RSVD
DEFAULT
0x00'h
0x00'h
0x00'h
0x00'h
0x00'h
0x00'h
DESCRIPTION
7-bit Remote Serializer Device Alias ID
Configures the decoder for detecting
transactions designated for an I2C Serializer
device. The transaction will be remapped to the
address specified in the SER ID register. A
value of 0 in this field disables access to the
remote I2C Serializer.
Reserved.
7-bit Remote Slave Device ID 0 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
I2C transaction is addressed to the Slave Alias
ID0, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved.
7-bit Remote Slave Device ID 1 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
I2C transaction is addressed to the Slave Alias
ID1, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved.
7-bit Remote Slave Device ID 2 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
I2C transaction is addressed to the Slave Alias
ID2, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved.
7-bit Remote Slave Device ID 3 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
I2C transaction is addressed to the Slave Alias
ID3, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved.
7-bit Remote Slave Device ID 4 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
I2C transaction is addressed to the Slave Alias
ID4, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
Reserved.
36
Submit Documentation Feedback
Product Folder Links: DS90UB914A-Q1
Copyright © 2016, Texas Instruments Incorporated