DS90UB914A-Q1 Datasheet, PDF (37/61 Pages) Texas Instruments – 25-MHz to 100-MHz 10/12-Bit FPD-Link III Deserializer

www.ti.com
DS90UB914A-Q1
SNLS499A – APRIL 2016 – REVISED JUNE 2016
Register Maps (continued)
Table 6. DS90UB914A-Q1 Control Registers⁽¹⁾ (continued)
ADDR
(HEX)
NAME
BITS FIELD
R/W
DEFAULT DESCRIPTION
0x0D
Slave ID[5]
7:1 Slave ID5
7-bit Remote Slave Device ID 5 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
RW
0x00'h
I2C transaction is addressed to the Slave Alias
ID5 , the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
0 RSVD
Reserved.
0x0E
Slave ID[6]
7:1 Slave ID6
7-bit Remote Slave Device ID 6 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
RW
0x00'h
I2C transaction is addressed to the Slave Alias
ID6, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
0 RSVD
Reserved.
0x0F
Slave ID[7]
7:1 Slave ID7
7-bit Remote Slave Device ID 7 Configures the
physical I2C address of the remote I2C Slave
device attached to the remote Serializer. If an
RW
0x00'h
I2C transaction is addressed to the Slave Alias
ID7, the transaction will be remapped to this
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
0 RSVD
Reserved.
7:1 Slave Alias ID0
RW
0x10
Slave Alias[0]
0x00'h
7-bit Remote Slave Device Alias ID 0
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction will be remapped to the address
specified in the Slave ID0 register. A value of 0
in this field disables access to the remote I2C
Slave.
0 RSVD
Reserved.
7:1 Slave Alias ID1
RW
0x11
Slave Alias[1]
0x00'h
7-bit Remote Slave Device Alias ID 1
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction will be remapped to the address
specified in the Slave ID1 register. A value of 0
in this field disables access to the remote I2C
Slave.
0 RSVD
Reserved.
7:1 Slave Alias ID2
RW
0x12
Slave Alias[2]
0x00'h
7-bit Remote Slave Device Alias ID 2
Configures the decoder for detecting
transactions designated for an I2C Slave
device attached to the remote Serializer. The
transaction will be remapped to the address
specified in the Slave ID2 register. A value of 0
in this field disables access to the remote I2C
Slave.
0 RSVD
Reserved.
Copyright © 2016, Texas Instruments Incorporated
Product Folder Links: DS90UB914A-Q1
Submit Documentation Feedback
37